Older GM Throttle Cable Retainer by Ztg525

I couldnt find a clip at a local auto parts store so I designed this really quick. The cable end feeds through the clip and then the clip is pushed into the pedal from the rear of the car going forward. Once clipped, the excess cable is pulled back through the clip and the cable end is pressed into the round opening of the clip. The rectangle on the side of the clip indexes it in an open area of the pedal. I will update this with some pictures later. This clip was used on a custom application but I believe the pedal was pulled from a Chevy S10 throttle pedal.

Download from thingiverse