Sim Racing Sequential Shifter by simraced

HOW IT STARTED I recently got my hands on an 3060 Sim Rig, (30x60MM Aluminium Profile), should of opted for an 40x80 or 8020 cockpit instead, but I love it. Recently started getting into rallying and such and figured it'll be smart to 3D Print one instead of paying 100$+ for a decent one. Found the original creators version and loved it, but the screws and parts he used would of cost me 100$ to find since they don't sell them anywhere near me. (2+ Hours Away) Worked on projects before so decided to remix it to use parts that are easier to find and parts that I had laying around. INFORMATION In the files you can find all the different knobs and such. I'd be happy to customize it to your liking and I hope to upload more and more mounts along with knobs, so anyone can mount it to their cockpit or such. If you have any questions or wants a change, please comment! PARTS I USED 2x - V155 Micro Switch 1x - USB Joystick Encoder 2x-6x - Springs They need to be atleast 5mm in Outer-Diameter and atleast 20mm long. 1x - 80mm M10 Hex Bolt (Lever Joint) 4x - 20mm M3 Screws (Micro Switches) 2x - 35mm M5 Countersunk Screws (Springs) 1x - 60mm M5 Hex Bolt (Knob) 4x - 30mm M6 Cap Head Screws (Base) 1x - ~1m Wire (I just got an old USB cable and cut it to length.) 1x - ~ 30cm Heatshrink (Optional but makes it cleaner.) TOOLS I USED Creality Ender 3 (BONTEC Direct Drive Upgrade, 3D Printed Knobs, 3D Printed Bed Cable Chain, Creality Ender 3 Pro Power Supply.) Pliers Rapid Thermal 1600 Heatgun Electronic Digital Caliper Screwdriver Cable Stripper Soldering Iron

Download from thingiverse