Xiaomi Lidar Case by klas_malman

Case for Xiaomi Lidar, printed in PETG 0.2 layer height (not critical.) 4x Ruthex M3 heatinserts used. Mounting stud location is still a little little bit off... WorkInProgress (Works, but a little bit of friction to assemble See discussion here:https://discuss.ardupilot.org/t/15-360-degree-xv-proximity-lidar/104887 PNG with dimension's from 3D-scanned unit, (Case is not yet updated with these dimensions ) RAW 3D-Scan of lidar in separate STL-file

Download from thingiverse