Project Feet Jig by PLBMAKER

I use two different size feet on various projects. On the project, the feet are recessed .08" into the bottom of the projects and held in place with 1/2" double sided tape. The feet are printed with TPU filament and the guide with PLA. To use, place the printed feet in the guide and stretch double sided tape across their surface aligning the top edge of the tape with the pegs. Lift the tape with the feet attached, trim and insert in the project. Feet Big dimensions: 1" x 0.6" x 0.12" Feet Small dimensions: 0.6" x 0.6" x 0.12" Corner radius on both is: 0.20 Feet are inset on the project to: 0.08" Feel free to message me if there are any questions.

Download from thingiverse