S.P.R.U.E. Sicaran Battle tank WH40K (re)scaled by (Walkyrie222) by ORKBILDA54

S.P.R.U.E. Sicaran Battle tank WH40K (re)scaled was made by (Walkyrie222),so all credit goes to him His Summary BIG UPDATE MAY 2019 !!! See below for details This is a 28mm version of the Epic scale Sicaran battle tank by Ologhzul (many thanks to him for the original model !) for your WH40K games :) I added as much details as my skills in 3D modelling and my time allow, and improved the model by adding many pieces borrowed to other makers : the tracks are rescaled from the amazing Ground Plunderer of outofstep the hull heavy bolter is also from the ground plunderer, as well as the targeters for the sponson lasers. the laser sponsons are remixes of the laser turrets of jdteixeira's Albatross. the heavy bolter sponsons are remixes of SebTheis' sponsons the muzzles are also taken from jdteixeira (man I love your job !!!) the engine unit is mainly a remix from the space troops transport by Typhus94 Thank you all guys !! UPDATE may 2018 : remixed and reworked the entire design for better impression and simplified geometry, PLUS, added bolts and features from the "SebTheis" version (though it is NOT a copy of his work : still some differences between the two). You can use the normal versions of the elements OR the "rivets" versions if you want to have all the bolts and screws added by SebTheis ! UPDATE may 2019 : rescaled the whole model to the real size of an original Sicaran (mine was too big). A big UP to Woddish for his accurate models : it helped me a lot in the process of rescaling mine ! I also remade ALL the STL files and regroupped all the sponsons on a single sprue. UPDATE BIS : I finally carved the spaces between the tracks and the hull. Took a while but looks far better :) I haven't updated the "complete" model though, so you'll still find the former tracks on it ! Print Settings Printer Brand:Prusa Printer:Prusa Mk2 Rafts:No Supports:No Resolution:0.1mm and 0.05mm Infill:20% square(100% for the smallest parts, like the sponsons) Filament:PRUSA PLA Notes:No support needed.0.2mm resolution is enough for the main body parts, though I print it at 0.1mm. I recommend to print the side sponsons and the engine at 0.07mm or 0.05mm if your printer can, and with a full infill. End of his summary Also,i'm gonna be re-uploading the stls to print the arcus,punisher(Sebtheis did these two give him a thank you if you go to his page) and omega(although that is already uploaded here,but i wanna give you all the option) turrets and the Venator conversion kit,just so you have the Sicaran Battle Tank's complete package,anyways,have fun and happy printing! Post some painted makes

Download from thingiverse