Octagon Pot by bbo

This is a nightmare for most printers. The torture test was designed for retraction and overhang angles, it gets progressively harder to print, and the Makerware tool path chronically fails at ~50% completion. Makerware Print Specs 2 shells 0-8% infill no support Torture Test Level 9 Thanks to Neverdun for testing this file on his trusty flash forge. Using Simplify3D for toolpath generation. The tool path is goofy to watch but it prints the full part. … Simplify3D Print Specs .2mm layer height 3 shells 20%infill no support 220C extrude temp 4000mm/m print speed 4200mm/m rapids .9 extrusion multiplier 1mm retraction distance 1200mm/m retraction speed

Download from thingiverse