Pin in Block (Brainteaser) by Wim_V

Enspired by the model from Botaz at printables I made the trick durable and easy to print. Also put the pin outside the block so you can easy print in different colors.

Printing (in PLA!):

Block: Layer 0.2 / Nozzle 0.4 / Perimeters:8 / Infill 100% / no support or brim / Print flat as postioned in the STL

Pin: Layer 0.2 / Nozzle 0.4 / Perimeters:5 / Infill 100% / no support or brim / Print with the head on the bed as positioned in the STL

It's a modern approach to the classic nail thru wood trick.
To get the nail inside you have to steam up and bend the wood.

With this model it's almost the same: PLA gets soft above 80°C...
See video how it works: