Air Traffic Control Tower Torture Test by Aviation_Design

Tired of the same old boat torture test or the over-remixed all-in-one test? Into aviation? Even if you are not into aviation this new ATCT (Air Traffic Control Tower) Torture test is for you and your 3d printer! This model features overhangs, bridging, and complex retractions for the antennas. And when you are done printing you have a cool model to add to your model airport or display on your shelf. This model is not to a particular scale but feel welcome to scale it to fit your desires! Test your printer and get a cool piece of custom-designed architecture to display! Happy Printing!

Want another challenge? How about the speed tower!: see how fast you can get this tower to complete on your printer! Follow these rules and enter your time in the comments!

STANDARD RULES:
.2 layer height
15% infill
No supports, brims, or rafts
PLA
No Z-Hop
No within infill combing (too advanced for some new users) disable combing
The start time is when the printer begins to put down the first layer of the tower and the end is when the hot end moves off of the finished print.
State your machine type (example: Creality K1 finished print in 48 minutes)
Don't scale down the model
Have fun! It's an optional challenge I think is fun to compete in and shouldn't be taken seriously!
Once Again: Happy Printing!